Product Description
Features:
Exquisite workmanship, low power consumption, high sensitivity, easy to operate, install and hide.
With a manual-modulated radio AV receiver.
Can be connected with varieties of monitors and TV with video & audio output jack to watch videos & images.
With 2 power adapters, and an antenna.
Horizontal Definition is 380TV Lines.
The camera Lens is 3.66mm.
Compact volume, light weight.
Suitable for monitoring, anti-burglary, guardianship, supermarkets, shops, workshops, schools, warehouses, offices, and other special tasks.
Specifications:
Image sensor: CMOS
Horizontal Definition: 380TV Lines
Lens: 3.66mm
Min.illumination: 0.1 Lux/F1.2
White Balance: Auto
Backlight Compensation: Auto
Scanning System: PAL/NTSC
Adapter: DC 9V 500mA
Package size: 19.1 * 17.2 * 8cm
Package weight: 430g
Package including:
1 * Wireless 1.2Ghz Camera
1 * Receiver
2 * Power Adapters
1 * Antenna
1 * Video Cable
1 * User Manual
Product Keywords
Wireless Camera Monitor 1.2Ghz Color Surveillance CMOS Camera Monitor
Home Tools Garden Tools Home Appliance
Product Tags
Other people marked this product with these tags:
infrared camera(26)
outdoor surveillance camera(9)
wireless camera(15)
wireless camera monitor(3)
security camera monitor(3)
wireless camera with monitor(3)
baby camera monitor(5)
三、INSTRUCTIONS MANUAL
PREAMBLE
Thank you for your purchase of this product!
Before using your new camera,please
read this user manual carefully.
To prevent fire or shock hazard,
do not expose the unit to rain or
moisture.
The symbol is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature
accompanying the appliance.
The symbol is intended to alert
the user to the presence of unin-
sulated“dangerous voltage” within
the product's enclosure that may
be of sufficient magnitude to
to persons.
CAUTION: To prevent electric shocks and risk of fire hazards,
Do not use other than specified power source
SAFETY PRECAUTIONS
Please read instructions before using
Camera, notice working voltage and
polority demands.
Do not attempt to open the camera, if
there is something wrong, please post
the camera to our company or contact us
for any reference.
Notice working temperature and usage
environment requirements, avoid using at
extremely high or low temperatures,
usually, the operating temperature is from
-10 C(14 F) to +50 C(122 F),however,
we recommend that the unit be used within
a temperature range of -5 C(23 F) to +40 C(104 F),
avoid water, moisture and dust, for it may
lead to unsatisfactory picture effect.
Do not expose to sunlight directly,
this may cause CMOS damage.
Do not touch sensor with
hand, if dust sticks on the surface
wipe it off softly with a lens cleaning
Paper.
The power that used for these
cameras must satisfy the requirement
for safety, the output voltage、 current、
polority and operating temperture
must satisfy the requirement for
these cameras.
For added protection for the
camera during a lightning storm,
or when it is left unattended and
unused for long periods of time,
unplug it from the wall outlet and
disconnect the cable system,
this will prevent damage to the
camera due to lightning and power
line surges.
The power supply and video output wire do
not be too long, otherwise, the camera can't
operat reliablely and the quality of pictures
will go to bad, as the wire is longer, the waste
is bigger, the amp is also smaller.
Do not place the camera on an unstable cart、
stand、 tripod、 bracket or table, the camera may
fall,causingsorius injury to a chaild or adult and
serious damage to the camera, use only with
mounting acces sories recommended by your
appliance dealer or sold with the camera any
mounting of the camera should follow your
appliance dealer's instructions.
The mounting of cameras should be firm, do
not cause any damage to persons and other
articles as they are droping.
The camera should never be placed near or over
a radiator or heater
The function switchs have been set to default
before shipment, if not Necessary, please do
not shift them.
Function selection switch
AWB ON/OFF-Auto white balance mode switch
Switch to ON is ATW mode
Switch to OFF is PUSH mode (default)
This function switch can't be selected for
camera that adopted
(Note:NO such function for B/W camera)
AGC ON/OFF-Auto gain control selection switch
Switch to ON is AGC low (default)
Switch to OFF is AGC high (for low illumination)
This function switch can't be selected
BLC ON/OFF-Back light compensation switch
Switch to ON is auto BLC (defanlt)
Switch to OFF is to turn off BLC
This functions switch can't be selected for
cameras that adopted, because
it has been setted to auto mode for these cameras.
The below chart shows the difference between
BLC ON and OFF
NO pictures after charged
It may result from the work of power supply,
have a check and see if voltage and polarity are
correct, in addition, please examine the relevant
connectors and monitors
The image on the screen is dim
Generally the reason is that the back focus fail
to be adjusted to the right position. You can
move the up and down position of "CS" circle
of camera installation lens, in addition, please
be sure lens is good
Interfering stripes of image horizontal directions.
This phenomenon may be cause by the too strong
AC ripple of power supply, which needs to filter
waves ,It may also be related to monitor and
equipments.
S/N ratio is poor
This phenomenon may be caused by three reasons:
First: The illumination is lower;
Second: The power supply voltage is lower;
Third: The connecting of wires are badness;
Please check the connecting wires, instead the
power supply, increase the illumination.
成像器件 Pick-up Device | 1/3”CMOS
| |
信号制式 TV System | PAL/NTSC | |
有效像素 Picture Element | PAL: 752(H)X582(V) NTSC:752(H)X492(V) | |
水平解析度 Horizontal Resolution | 420TV Lines | |
最低照度 Minimum Illumination | 0.5LUX/F1.2 | |
红外灯照射距离 Infrared Lamps Distance | 无 | |
同步方式 Synchronous System | 内同步 Internal Synchronization | |
电子快门 Electronic Shutter | 1/50(1/60)1/100.000秒 1/50（1/60）1/100.000sec | |
背光补偿 Backlight Compensation | 自动 Auto | |
自动增益控制 Auto Gain Control | 自动 Auto | |
白平衡 White Balance | 自动跟踪 Auto | |
信噪比 S/N Ratio | ≥48dB | |
伽玛校正 Gamma Correction | 0.45 | |
视频输出 Video Output | 1.0Vp-p/75Ω(BNC) | |
工作温度 Operation Temperature | (-20)℃—(50)℃ | |
工作电源 Power Supply | DC12V 500mA | |
镜头 Lens | 3.7mm |