| 注射装置 INJECTION UNIT | | | A | | B | |
| 螺杆直径 SCREW DIAMETER | mm | | 28 | | 32 | |
| 螺杆长径比 SEREW L/D FATIO | L/D | | 21.5 | | 20 | |
| 理论注射容积 SHOT SIZE(THEORETICAL) | cm3 | | 63 | | 82 | |
| 注射重量 INJECTION WEIGHT | g | | 57 | | 73 | |
| 注射速率 INJECTION RATE | g/s | | 55 | | 66 | |
| 塑化能力 PLASTICIZING CAPACITY | g/s | | 6.9 | | 8.4 | |
| 注射压力 INJECTION PRESSURE | Mpa | | 168 | | 129 | |
| 螺杆转速 SCREW SPEED | rpm | | | 175 | | |
| 合模装置 CLAMPING UNIT | | | | | | |
| 合模力 CLAMPING FORCE | KN | | | 500 | | |
| 移模行程 TOGGLE STROKE | mm | | | 245 | | |
| 拉杆内间距 SPACE BETWEEN TIE-BARS | mm | | | 280x260 | | |
| 最大模厚 MAX.MOULD HEIGHT | mm | | | 280 | | |
| 最小模厚 MIN.MOULD HEIGHT | mm | | | 100 | | |
| 顶出行程 EJECTOR STROKE | mm | | | 55 | | |
| 顶出力 EJECTOR TONNAGE | KN | | | 18 | | |
| 其 他 OTHERS | | | | | | |
| 最大油泵压力 MAX.PUMP PRESSURE | Mpa | | | 16 | | |
| 油泵马达功率 PUMP MOTOR POWER | KW | | | 5.5 | | |
| 电热功率 HEATING POWER | KW | | | 3.1 | | |
| 外形尺寸(长x宽x高) MACHINE DIMENSIONS(LxWxH) | m | | | 2.9x1.1x1.5 | | |
| 机器重量(约) MACHINE WEIGHT(APPROXIMAT) | t | | | 1.5 |
