| 种类：卧式直压注塑机 | 品牌：吉达 | 型号：JD210 |
| 射胶量：480（g） | 合模力：2100（kN） | 开模行程：1000（mm） |
| 是否提供加工定制：是 |
| Specification | ||||||
| 注射装置 | 型号 | Model | JD-210 | |||
| 国际规格(1) | International Designation(1) | 210 | ||||
| 螺杆编号 | Screw Code | - | A | B | C | |
| 注射压力 | Injection Pressure | Mpa | 170 | 145 | 115 | |
| 每注射量(硬胶)(2) | Injection Weight (PS) | g | 481 | 568 | 710 | |
| oz | 17 | 20 | 25 | |||
| INJECTION | 螺杆直径 | Screw Diameter | mm | 55 | 60 | 67 |
| UNIT | 螺杆长径比L:D | Screw L:D Ratio | - | 20:01 | 19:01 | 17:01 |
| 螺杆转速 | Screw Speed | r.p.m. | 5-160 | |||
| 注射率 | Injection Rate | g/s | 154 | 183 | 228 | |
| 塑化能力 | Plasticizing Capacity(ps) | g/sec | 28 | 46 | ||
| 锁模形式 | Clamping Units | - | ||||
| 锁模力 | Clamp Tonnage | KN | 2100 | |||
| 合模装置 | 锁模行程 | Toggle Stroke | mm | 460 | ||
| LOCKING | 模板最大开距 | Max Daylight Opening | mm | 1000 | ||
| UNIT | 容模量(最小-最大) | Mould Thickness(Min-Max) | mm | 200-580 | ||
| 拉杆内距 | Space Between Tie Bars | mm | 520*450 | |||
| 液压顶出力 | Ejector Tonnage | KN | 43.6 | |||
| 顶出行程 | Ejector Stroke | mm | 100 | |||
| 油压系统压力 | Max. Pump Pressure | Mpa | 14 | |||
| 油泵马达功率 | Pump Motor Power | kw | 18.5 | |||
| 其他 | 电热功率 | Heater Power | kw | 15 | ||
| GENERAL | 电源需求 | Power Requirement | A | 70 | ||
| 油箱容积 | Oil Tank Capacity | L | 400 | |||
| 机器重量 | Machine Weight | tons | 8.5 | |||
| 外形尺寸 | Machine Dimension (LxWxH) | M*M*M | 5.8*1.2*1.9 | |||
