| 品牌： | ASK | 型号： | LCF30BUU |
| 旧型号： | X | 类型： | 直线运动轴承 |
| 内径： | 30（mm） | 外径： | 52（mm） |
| 厚度： | 122（mm） | 重量： | 136（kg） |
| 保持架及其材料： | J钢板冲压 | 使用特性： | 高温 |
| 用途： | 纺织机械 | 滚动体列数： | 双列 |
| 滚道类型： | 球面滚道 | 样品或现货： | 现货 |
| 轴承材质： | 高温轴承钢 |
N (U, UU)
The most commonly used cylindrical precision ball bushing. This is the most widespread metric series in Japan, available in“P” and “SP” grade precision. The ball retainer is steel and heat-resistant up to 150°C with no seal.
N-V (U, UU)
The most commonly used cylindrical precision ball bushing. The ball retainer is made of synthetic resin.
N-VAJ (U, UU)
A clearance adjustment slit down the side of the ball bushing, combined with housing of an adjustable outer diameter, facilitates adjustment to the amount of space between shaft and ball bushing.
N-VOP (U, UU)
The same as the N-V model except with one circuit of steel balls removed. Configured for use when the shaft is held in place by a support rail.
N-VM (U, UU)
This medium-length ball bushing (between standard and double length) may be selected for a particular installation space, load capacity or other usage specification. Track length is maximized and load capacity increased employing a single ball retainer.
NL-V (U, UU)
Double the length of a standard ball bushing. This product has two retainers and is therefore suitable when anticipating moment loads.
Please feel free to use of CAD data download, the request of material, and the question.
Asian Metric Series (Flanged)
NFES-VUU
This single-type flanged ball bushing has a single synthetic resin retainer and a square flange at one end of the outer sleeve. Electroless nickel plating is applied as standard to the outer surface.
NFED-VUU
This single-type flanged ball bushing has a single synthetic resin retainer built into the flange-integrated outer sleeve. The circular flange is located at one end of the outer sleeve. Electroless nickel plating is applied as standard to the outer surface.
NFEO-VUU
This single-type flanged ball bushing has a single synthetic resin retainer built into the flange-integrated outer sleeve. The oval flange is located at one end of the outer sleeve. Electroless nickel plating is applied as standard to the outer surface.
NFIS-VUU
This ball bushing is shaped so the end of its sleeve can be used as an inlay. It has a square flange and a single synthetic resin retainer. Electroless nickel plating is applied as standard to the outer surface.
NFID-VUU
This ball bushing is shaped so the end of its sleeve can be used as an inlay. It has a circular flange and a single synthetic resin retainer. Electroless nickel plating is applied as standard to the outer surface.
NFIO-VUU
This ball bushing is shaped so the end of its sleeve can be used as an inlay. It has an oval flange and a single synthetic resin retainer. Electroless nickel plating is applied as standard to the outer surface.
NFES-VMUU
This medium-length ball bushing (between standard and double length) may be selected for a particular installation space, load capacity or other usage specification. It has a single synthetic resin retainer and a square flange at one end of the outer sleeve. Electroless nickel plating is applied as standard to the outer surface.
NFES-VLUU
The ball bushing has a square flange attached to the end of its sleeve. It contains two synthetic resin retainers, which give it a higher allowable load and allowable moment load compared to a single-retainer bushing. Electroless nickel plating is applied as standard to the outer surface.
NFED-VLUU
The ball bushing has a circular flange attached to the end of its sleeve. It contains two synthetic resin retainers, which give it a higher allowable load and allowable moment load compared to a single-retainer bushing. Electroless nickel plating is applied as standard to the outer surface.
NFEO-VLUU
The ball bushing has an oval flange attached to the end of its sleeve. It contains two synthetic resin retainers, which give it a higher allowable load and allowable moment load compared to a single-retainer bushing. Electroless nickel plating is applied as standard to the outer surface.
US/European Metric Series (No Flange)
L-V (U, UU)
The most commonly used cylindrical precision ball bushing. This is the most widespread metric series in Europe and US regions. The ball retainer is made of synthetic resin.
L-VAJ (U, UU)
A clearance adjustment slit down the side of the ball bushing, combined with housing of an adjustable outer diameter, facilitates adjustment to the amount of space between shaft and ball bushing.
L-VOP (U, UU)
The same as the L-V model except with one circuit of steel balls removed. Configured for use when the shaft is held in place by a support rail.
LL-V (UU)
Double the length of L-V series bushings. This product has two retainers and is therefore suitable when anticipating moment loads.