| 用途：风光互补控制器 |
First, an overview
风光互补控制器主要为夜间照明使用，该设备通过太阳能和风力发电机对蓄电池进行智能充电。控制器采用先进的微电脑处理器，工作稳定，抗干扰性强。外观设计大方，操作方便，具有多窗口切换显示。
Wind controller is mainly used for night lighting, the equipment by solar and wind generator for intelligent charging of the battery。Controller uses advanced microcomputer processor, job stability, immunity to interference. Elegant design, easy to operate with more windows to switch the display.
二、特点 |
l数码管显示直观，操作方便，多窗口切换显示。
Digital display and intuitive, easy to operate, multi-window switch display
l有电池过放保护There are over discharge protection
l电池防接反保护Protection against reversed battery
l负载电流过大保护Load over current protection
l有数码管屏保（可节约电池耗电）
There are digital screensavers (saves battery power)
l智能PI调节Intelligent PI controller
l光控、时控相结合控制方式
A combination way of light control and timed control
l具有显示偏差修正Has shown bias correction
l内部时钟芯片小于5PPMInternal clock chip is less than 5PPM
lPWM脉宽调制充电方式PWM charging
l根据环境温度的变化，对电池进行智能充电，有效地延长电池寿命According to the environmental temperature changes, the intelligent battery charging, effectively extending the battery life
l可自适应12V或24V供电系统
Can be adaptive power supply system 12V or 24V
l尺寸145×118×40mmSize 145×118×40mm
产品型号Model | WST-11-12V | WST-11-24V |
风机输入Fan Input | 三相AC≤70V，P≤350W | 三相AC≤70V，P≤350W |
光伏电池输入PV input | DC 17.5Vpm，I≤20A | DC 35.0Vpm，I≤10A |
输出电压Output voltage | DC 14.4V | DC 28.8V |
输入过压保护值 Input over-voltage protection value | AC 87±5V | AC 87±5V |
输出过流保护值 Output over-current protection value | DC 22A±1A | DC 11A±1A |
适用蓄电池 Applicable to battery | 12V，100～200Ah | 24V，100～200Ah |
蓄电池充满电压值 Full battery voltage | 可调 | 可调 |
蓄电池充满返回值 | DC 12.6±0.2V | DC 25.2±0.3V |
输出支路 | 2路，1路光控+时控，另1路时控 | 2路，1路光控+时控， 另1路时控 |
外形尺寸 | 145×118×40mm | 145×118×40mm |
工作环境 | 环境温度－10℃～+50℃，相对湿度0～90％ | 环境温度－10℃～+50℃，相对湿度0～90％ |
*****恒流控制一体机/半功率控制器/双路控制器*****
风能太阳能产品销售专线：15323471110