| 品牌：宝鼎牌 | 类别：粉碎机 | 产品别名：塑料瓶粉碎机、塑料瓶破碎机 |
| 产品用途：粉碎塑料瓶 | 型号：PC-300E | 电动机功率：5.5（KW） |
| 外形尺寸：1.2X0.9X1.3（m） | 重量：480（kg） |
中文破碎机特点：
1.整机由高强度中碳钢制作，抗冲击。
2.任何塑胶（如较大硬度的常用塑胶及工程塑胶），高低密塑料，薄膜软料，胶袋胶布皆可用快速粉碎，一机多用，是为全功能强力粉碎机。
3.大块塑料，不必锯切细块，可直接粉碎，决不卡机。
4.大型粉碎机采用水冷却机身，减少因积热生产里应力效应，延长使用寿命，并可避免粉碎刀因过热而硬度降低。
5.拆装简单，清料容易，并加装安全开关。
6 .筛网刀片采用高级工具钢SKH9，SKD-11及9SiCr。
7.粉碎室前后为双层隔音,中间填充隔音材料。
8.筛网孔径标准配置为9mm(PC15HP-75HP),厚度为mm其它规格可直接顶做。
9.本机适用于粉碎各种塑胶，树脂，轮胎，药材，木材，茶枝，橡胶及其它。
10.机种齐全，适合任何工厂使用，并可按各种要求设计制作。
English crusher characteristics:
1.The whole machine the carbon steel creation from high strength, the anti- pound at.
2.Any plastics( such as the in common use plastics and the engineering plasticses of the bigger degree of hardness), high and low-pressure plastics, the thin film is soft to anticipate, the gum bag plastic cloth all can use to smash quickly, a machine uses much, smashing the machine for the strong dint of whole function.
3.The big piece plastics, need not saw to slice the thin piece, can smash directly, will never card machine.
4.Large smash the machine adoption watercooling fuselage of airplane, reduce the degree of hardness to lower because accumulate the heat to produce mile should the dint effect, the extension service life, and can avoid smash knife because of lead heat.
5.Dismantle to pack in brief, pure anticipate easily, and add the safe switch.
6 .Filter the net razor blade adopts the deluxe toolsteel SKH9, SiCrs SKD-11 and 9.
7.Smash the room to is soundproof for a pair of layerses in front and back, fill the soundproof material in the center.
8.Filter the mesh path standard installs for the 9 mms( HPs PC15HP-75), thickness for other specifications of mm can directly the crest do.
9.This machine is applicable to smash various plastics, resin, tire, the medicine material, timber, the tea, rubber and other.
10.The model is well-found, in keeping with any factory usage, and can press various request design creation.